Is there any way to repair system files in Windows XP without using the XP cd?

October 4, 2009

FROM A WEBSITE ON SFC: To protect your computer from old system files, Microsoft created a special service that is built into the operating system. This service monitors your system files, and if one is replaced or deleted, ICS will automatically restore the system file. SFC works in conjunction with a utility called Windows File Protection that keeps the system file cache: (%Systemroot%\System32\Dllcache) uppdated with the newest Microsoft Approved files as they are installed on your system. I prefer to use the system backup for the ability to roll back to a former configuration however. To manually invoke the system file checker, be sure you have administrative access then go to the command prompt and type: sfc /scannow The system will immediately begin to check all the current system files and restore the cached approved copies. You may be asked to insert the Windows CD as well during the restore. IS THERE ANY SOFTWARE AVAILABLE TO DOWNLOAD SO THAT I DONT’T HAVE TO USE THE CD?

Is there any way to repair system files in windows XP without using the XP cd?

September 26, 2009

FROM A WEBSITE ON SFC:

To protect your computer from old system files, Microsoft created a special service that is built into the operating system. This service monitors your system files, and if one is replaced or deleted, ICS will automatically restore the system file.

SFC works in conjunction with a utility called Windows File Protection that keeps the system file cache: (%Systemroot%\System32\Dllcache) uppdated with the newest Microsoft Approved files as they are installed on your system. I prefer to use the system backup for the ability to roll back to a former configuration however.

To manually invoke the system file checker, be sure you have administrative access then go to the command prompt and type:

sfc /scannow

The system will immediately begin to check all the current system files and restore the cached approved copies. You may be asked to insert the Windows CD as well during the restore.

IS THERE ANY SOFTWARE AVAILABLE TO DOWNLOAD SO THAT I DONT’T HAVE TO USE THE CD?

USB ports stopped working and I’ve tried everything. Is it a software or hardware issue?

August 5, 2009

A few days ago I was syncing my Samsung Cell Phone to my Inspiron 1150 and afterwards the computer cut off. I restarted it and neither one of the USB Ports in the back of it are working. Below are the following measures I’ve tried to resolve this issue.

1.Called Dell Tech support a multitude of times
2.Ran a Customized USB Test from the Dell Diagnostics CD and all checked fine.
3.Ran a Express USB Test from the Dell Diagnostics CD and all checked fine.
4.Ran a Symptom Tree Test for USB’s on Dell Diagnostics CD and all checked fine.
5.Ran a Thorough Test from the Dell Diagnostics CD and all checked fine.
6.Ran a Test from the Dell Inspiron ‘Fn’ key at boot and all checked fine.
7.Downloaded & installed from Dells Web site the most recent Bios, Division 7.
8.Downloaded & installed from Dells Web site the most recent Chipset Drivers.
9.Plug and Play is running & automatic in the Services portion of Computer Management.
10.USB is enabled in the Bios.
11.There is no damage to the USB Ports or plastics.
12.All USB items that wont work on my Inspiron 1150, work on other computers.
13.I’ve uninstalled all USB’s from Device Manager, restarted the computer, and reinstalled.
14.Ran the System File Checker (SFC /scannow) and all checked fine.
15.Ran Norton to check for viruses and all checked fine.
16.Ran Ad-Aware to check for spyware and all was fine.
17.I’ve left the computer unpowered for 8 hours, no plug and no battery.

With all of that done, still no USB device plugged into either of the 2 existing ports on my Inspiron 1150, show a device in Windows when something is plugged into them. No, mouse, no printer, no, flash memory drive, no nothing. Even though I see the flash memory drive light up showing its receiving power from the USB when it’s plugged in, it still doesn’t show in windows. Dell through technical support has said it’s a software issue, then hardware issue. But the diagnostics all show the hardware is fine. I did purchase a 2 port USB PCMCIa card for my Inspiron 1150 and its USB ports work fine, even though earlier today Dell technical support said that there was no such card that would function in my PCMCIa Slot. Technical supports solution, as always, is to reformat and reinstall Windows. I’m willing at this point to try and do a repair to windows to possibly see if I can get the two primary USB ports on my computer to work. But for some reason it’s asking for my password to start the repair and I’ve never ever had a pass word. Does anyone have any solution to my USB problem or a way for me to resolve the pass word issue so I can attempt to repair Windows?
Thanks for your reply programmer2718 and forgive me if I’ve not replied correctly in this forum. But to answer your questions:

1. I have XP Home SP3.
2. When trying to repair Windows with my Windows Installation CD, it asks for my Password. I tried to chat online with Dells technical support but was asked to send them a e-mail because they were so busy. As of yet I’ve not received a reply.
3. The two existing USB ports on the BACK of the computer do not work. Neither of them function, even though my flash memory stick lights up showing its receiving power from those two non-functional USB ports.
4. I purchased a PCMCIa card that has two USB ports. Those two USB ports work when I put the PCMCIa card in the PCMCIa card slot on the SIDE of my laptop.

So, it seems that your suggesting I should use Ubuntu and try to see if that operating system will see the two USB ports that aren’t apparently functioning in my Windows XP. I’ll try that and see. Thank you.

Is there any way to repair system files in Windows XP without using the XP cd?

June 25, 2009

FROM A WEBSITE ON SFC: To protect your computer from old system files, Microsoft created a special service that is built into the operating system. This service monitors your system files, and if one is replaced or deleted, ICS will automatically restore the system file. SFC works in conjunction with a utility called Windows File Protection that keeps the system file cache: (%Systemroot%\System32\Dllcache) uppdated with the newest Microsoft Approved files as they are installed on your system. I prefer to use the system backup for the ability to roll back to a former configuration however. To manually invoke the system file checker, be sure you have administrative access then go to the command prompt and type: sfc /scannow The system will immediately begin to check all the current system files and restore the cached approved copies. You may be asked to insert the Windows CD as well during the restore. IS THERE ANY SOFTWARE AVAILABLE TO DOWNLOAD SO THAT I DONT'T HAVE TO USE THE CD?